INSTALLATION OF PASSBOOK PRINTER

Add This To Del.icio.us Share on Facebook StumbleUpon This Add to Technorati Digg This Pin It

Installation:
Go to add printer
Select Generic manfacture and printer Generic text only
Go to printer and fax
Click on File menu button
Click on server properties
Click on blank box(create a new form)
Type form name as PASSBOOK and give Form description as follows:

Paper size                  Printer are margin

Width 8.27in              Left0.08in          Top.0.98in
Height. 5.3in              Right.0.00in       Bottom.0.08in

click on 'Save form' button then apply ok button>
then right click On passbook printer>printing preferences>Advanced>Paper size> select the form PASSBOOK

Steps for Printer Setup

1. Press both station 2 and power on button at a time wait for few seconds ready power button will on with green light then insert A4 size paper take existing Printer set up compare with and check each one and mark out where the Changes are required in manually.
2. Now press both station1 ,station2 and power on button after few seconds insert paper. It asks to press Local button for continue.
3. Menu config will come then press station 1 button, just go on pressing station1 Button wherever the changes required just press station 2 button.

4. After completion of the changes press Local button to save the parameter.

5. Now press Power off the button .

6. Now you will be able get proper printing.

Screenshots of the Setup

Click create a new form box ,give form name as PASSBOOK or any name, give paper size shown above, click on save form button

click on advanced menu

select the paper size form PASSBOOK then click on ok button

on the request of Veerendra S Porapur, System Administrator, Ranebennur MDG

PrintPDF

For Further Reading,

POSTAL TECHNOLOGY, Sanchaya Post